swissonic EasyKey 49 - MIDI Configuration and Presets

Proceed as follows to assign the MIDI bank:
1. Press [EDIT] to activate the Edit mode.
2. Press [MSB] ([LSB]).
ð
The currently set value is shown in the display.
3. Enter the desired value (‘1’…‘127’) via the numeric keys.
4. Confirm the input with [ENTER].
5. Press [EDIT] to leave the Edit mode.
Proceed as follows to send Programme Change commands
1. Press [EDIT] to activate the Edit mode.
2. Press [PROG].
ð
The currently set value is shown in the display.
3. Enter the desired value (‘1’…‘127’) via the numeric keys.
4. Confirm the input with [ENTER].
5. Press [EDIT] to leave the Edit mode.
Proceed as follows to assign the MIDI channel:
1. Press [EDIT] to activate the Edit mode.
2. Press [CHANNEL].
ð
The currently set value is shown in the display.
3. Enter the desired value (‘1’…‘16’) via the numeric keys.
4. Confirm the input with [ENTER].
5. Press [EDIT] to leave the Edit mode.
Proceed as follows to store a preset:
1. Press [EDIT] to activate the Edit mode.
2. Press [PRESET STORE].
ð
The display shows ‘Sto’.
3. Use the numeric keys to enter a value between ‘1’…‘9’.
4. Confirm the input with [ENTER].
5. Press [EDIT] to leave the Edit mode.
MIDI bank assignment
Programme change
MIDI channel assignment
Storing a preset
Functions
EasyKey 25, EasyKey 49, EasyKey 61
13