9
Device Status Description
Adding Device
Indicator light flashes rapidly.
Indicator light flashes slowly.
Connecting to the Internet.
Indicator light stays lit up.
Indicator light flashes once.
Remote control added or your SwitchBot
Bluetooth device is operated via the app
once.
Upgrading Firmware
Indicator light starts flashing slowly and
other lights on the display go off.
The display lights up and indicator light
flashes slowly.
Firmware upgraded successfully.
The display and indictor light both stay lit
up.
Connected to the Internet.
Learning Remote Control
Indicator light lights up for 2 seconds then
goes off.
Ready to learn remote control.
Indicator light flashes twice after you press
your remote control.
Remote control learned successfully.
Indicator light flashes once after 10
seconds
Learning timeout. Failed to learn remote
control.
Temperature and Humidity
Buzzer beeps continuously. Temperature
and humidity readings and button lights
flash constantly.
Temperature or humidity reading reaches
its set value.
Press any button on your Hub 2 to lift the
alert or wait for 30 seconds for the alert to
go off itself.
Please visit support.switch-bot.com for detailed information.
To Next Page
Loading...