27
28
29
Operating the Walkie−Talkies
65
Transmitting and receiving
Transmitting
a P ð Transmit
Hold the walkie−talkie approx. 5 to 7 cm from your mouth
and speak at a normal volume. In order to talk to other sub-
scribers, the respective walkie−talkies must be set to the
same channel and CTCSS code.
Receiving
b P Receive
Radio signals cannot be received when the P button
is being pressed.
Confirmation signal (Roger beep)
The confirmation signal is issued on releasing the P button.
This signals to the caller that you have ended transmission.
Activating/Deactivating the confirmation signal
5 x Activate setting mode
+
ON
, P Activate the confirmation signal
,
OF , P Deactivate the confirmation signal
Selecting a channel
1 x Activate setting mode
+ or ,, P Select the channel and confirm it
Channel Frequency (MHz) Channel Frequency (MHz)
1 446.00625 5 446.05625
2 446.01875 6 446.06875
3 446.03125 7 446.08125
4 446.04375 8 446.09375
To Next Page
Loading...
