Swordfish SuperFast A3 - Getting Started

Operating Instructions
www.snopakebrands.com
6
Getting Started
Allow enough space behind the laminator for your laminations to lay  at whilst cooling. Do not cover the
machine or place anything on top of it.
Position the laminator on a level surface, close to a 13Amp socket.
CAUTION
Do not locate the laminator:
• Near any heat appliances such as heater or stove
• Directly exposed to sunlight
• Close to an air-conditioning unit
• In a poor ventilated environment
• On an irregular or inclined surface
2
1
SuperFast Laminat
or
P
OUCH
THIC
KNESS
MAX
2x125
[250]
MICRO
NS
MAX
0
.
6
mm
LAM
INATION
THIC
KNESS
NO SM
ALL
IT
EM
S
NO ORG
ANIC
MATERI
AL
3mm
MAX BORDER
ALLOWED
SuperFast Laminat
or
POU
CH
THICK
NESS
MAX
2x125
[250]
MICRONS
MAX
0
.6
mm
LAM
INATION
THIC
KNESS
NO SM
ALL
ITEM
S
NO ORG
ANIC
MATER
IAL
3mm
MAX BORDER
ALLOWED
The Sword sh SuperFast Laminator is a real timesaver. The verstaile machine is equipped with sophisticated
temperature control, four precision rollers and rapid warm-up time and laminating speed – all of which
combine to give perfect laminations.