Power Supply Voltage
Input Current
Rated Output Current
Current Adjusting Range 20-100A
No-Load Voltage
Rated Duty Cycle
Working Mode
Air Pressure
Cutting Thickness
After Flow Time
MODEL: DIGI-CUT100
1 MAIN USE AND RANGE
Inverter is an inverter based air plasma cutter. This allows the machine to cut all metals
cleanly, safely and economically.
2 OPERATING CONDITION AND WORK SURROUNDING
2.1 OPERATING CONDITIONS
Voltage of power source: 3 x 415V ± 10%
2.2 WORK SURROUNDINGS
2.2.1 Relative humidity: ≤90% (average monthly temperature ≤20ºC)
2.2.2 Ambient temperature: –10ºC - 40ºC
2.2.3 The welding site should have no harmful gas, chemicals, moulds and
inflammable matter, explosive and corrosive medium.
2.2.4 Operating in rain is not allowed.
3 TECHNICAL SPECIFICATIONS
STEALTH DIGI-CUT100
3 x 415 V± 10%;50/60Hz
30A
100A
20-100A
250V
60%
Contacting/NotContacting
0.2-0.4MPa
35mm
10S