Need help?Do you have a question about the SWR BASS 350 and is the answer not in the manual?
General| Power Output | 350 Watts @ 4 Ohms, 240 Watts @ 8 Ohms |
|---|---|
| Impedance | 4 Ohms |
| Channels | 1 |
| Type | Bass Amplifier |
| Inputs | 1 x 1/4" (Instrument), 1 x XLR (Balanced) |
| Outputs | 1/4" and XLR |
| EQ | 3-band |
Avoid electric shock, ensure proper grounding, cord handling, and prevent liquid/object entry. Refer servicing to qualified personnel.
Operate in dry environments, ensure proper ventilation, keep away from heat, and use stable accessories.
Read and retain instructions, heed warnings, follow all operating procedures, use correct replacement parts, and perform safety checks.
Details the Bass 350's design, components like Groove Tubes 12AX7A, chosen materials, and hand-assembly in California.
Details power output at various impedances and the amplifier's frequency response range.
Covers input/output impedance, sensitivity, signal-to-noise ratio, and equivalent input noise.
Provides the physical dimensions (19" W x 3.5" H x 10.125" D) and weight (21 lbs).
Use for passive or active instruments; try Passive/Active first, then Active if needed.
Gain controls preamp volume; Clip LED indicates headroom issues.
Shapes low end, reduces masking frequencies, and enhances high transients for a transparent sound.
A shelving EQ to boost or cut bass frequencies from 30 Hz to 100 Hz.
Level adjusts boost/cut, Frequency selects the tone area for adjustment.
A shelving EQ to boost or cut treble frequencies from 2kHz to 14kHz.
Mixes the instrument signal with the processed signal from an external effects unit.
Master Volume controls overall output level; Power switch turns the unit on/off.
Details the thermostatically controlled cooling fan and its defeat switch.
Explains the soft knee limiter, its activation via the Effects Blend control, and the Limiter Active LED.
Provides a true balanced record out, with Line or Direct signal options.
Isolated jack for connecting a tuner without affecting instrument tone.
Allows integration of external effects units via Send and Receive jacks.
Details 1/4" and Speakon speaker outputs, minimum impedance, and recommended cable types.
Lists compatible SWR speaker enclosures and combinations for optimal performance.
Explains the function of speaker and AC fuses, their ratings, and replacement guidelines.
Describes the standard AC power cord connection and requirements.
Provides starting point settings for various musical styles like Rock, Reggae, Jazz, Slap, and Studio.
Recommended tone control settings for a Rock playing style.
Recommended tone control settings for a Reggae playing style.
Recommended tone control settings for a Jazz playing style.
Recommended tone control settings for Slap and Studio playing styles.
Details the two-year warranty period, coverage, and conditions, including voiding clauses.
Outlines the steps for obtaining warranty service or repair through an authorized center.
Provides contact details for FMIC Consumer Relations and the SWR website for service information.
To Next Page
