5. Push to start
This function is designed for safety reasons. The option allows the acceleration to be
activated only the scooter is first pushed with the foot and the wheel is in motion, ensuring
that the acceleration lever is not actioned by mistake. The zero start function is not activated
by default, you need to activated it after the purchase of the scooters.
This function can be activated or deactivated from the central control unit, according to the
user’ s needs.
6. Maximum speed limitation
A countries have a legislation that imposes a speed limitation for electrical vehicles. Once
a maximum speed is set, the scooter won’t exceed that speed. The maximum speed limit
options are 6km/h,12km/h, 20km/h, 25km/h, 30km/h.
This function can be activated or deactivated from the central control unit, according to the
user’ s needs.
To Next Page
Loading...
Need help?
General
