www.sy.co.uk 10
Safety Instructions
To ensure reliable operation of these product as well as protecting the safety of any person using or
handling
these devices while powered, please observe the following instructions.
1. Use the power supplies provided. If an alternate supply is required, check Voltage,
polarity and
that it has sufficient power to supply the device it is connected to.
2. Do not operate these products outside the specified temperature and humidity range
given in
the above specifications.
3. Ensure there is adequate ventilation to allow this product to operate efficiently.
4. Repair of the equipment should only be carried out by qualified professionals as these
products
contain sensitive devices that may be damaged by any mistreatment.
5. Only use these products in a dry environment. Do not allow any liquids or harmful
chemicals to
come into contact with these products.
6. Due to the weight and physical size of some of these matrix switchers, correct Manual
Handling
and Lifting procedures should be observed at all times while handling these products in
order
to minimise the risk of injury.
After Sales Service
1. Should you experience any problems while using this product, firstly refer to the
Troubleshooting
section in this manual before contacting SY Technical Support.
2. When calling SY Technical Support, the following information should be provided:
Product name and model number
Product serial number
Details of the fault and any conditions under which the fault occurs.
3. This product has a two year standard warranty, beginning from the date of purchase as
stated on
the sales invoice. Online registration of this product is required to activate the full three
year
extended warranty. For full details please refer to our Terms and Conditions.
4. SY Product warranty is automatically void under any of the following conditions:
SY-MUHD-44 & SY-MUHD-88
Important notice, please read
To Next Page
Loading...
Need help?
General