SY Electronics SY-MUHD-44 User Manual

SY-MUHD-44 & SY-MUHD-88
www.sy.co.uk 3
① HDMI input ports
② HDMI output ports
③ Analogue audio output
④ Ethernet control
⑤ RS23 for control
⑥ IR port (for external IR receiver)
⑦ DC power input
Installation
1) Connect the HDMI input sources to SY-MUHD-44 /88
2) Connect the HDMI outputs to SY-MUHD-44 /88
3) Power on the required input sources
4) Connect the power supply into the SY-MUHD-44 and turn on the displays
5) Use the remote control or the front panel push buttons to choose input to output source selection
*Insert and remove HDMI cables carefully to avoid damaging the HDMI connectors on the matrix switchers.
Operation
Front Panel Control
The SY-MUHD-44 and SY-MUHD-88 front panel controls allow for the selection of the inputs to the various
outputs. First press a button on the OUTPUT row to choose the output port, then press a button on the
INPUT row to select the input signal for the selected output. (Output, then Input)
Figure 1- MUHD-44 Front Panel Controls
Figure 2 - MUHD-88 Front Panel Controls

SY Electronics SY-MUHD-44 Specifications

General

Brand	SY Electronics
Model	SY-MUHD-44
Category	Matrix Switcher
Language	English