Sylvac S Mike PRO - Full Switch off

E
15
Each push on the [MODE] button moves the cursor to the right. A long press on the [MODE] button vali-
dates the value of Preset and leaves the Preset menu. The instrument automatically returns to «Measuring
Mode» when there are no further actions regarding the buttons [MODE] or [SET] for a period of 15s.
A push of 2s on the [SET] button assigns the Preset-value (or zero) to the current position of the measuring
spindles.
9. Reset, recall of the preset
10. Changing unit (mm/inch)
Repeatedly press the [MODE] button to display the [UNIT] menu. Presset then the [SET] button to change
the unit «MM» or «INCH».