E
17
13. Proximity connection (Instrument non Bluetooth® only)
The external micrometer has a contact less data output. This data output enables the direct connection to a
computer or a printer using a Proximity connection cable.
A short press on the [SET] button transmits the current value to the data connection. The indicator send
Data is briefly displayed.
For more information, see the instructions of the proximity cable.
14. Bluetooth
®
Function
Press the [MODE] button until «BT». Then press the button [SET] to activate or desactivate the function or
to perform a reset of the connection, then press [MODE] the button to validate. A third menu allow to read
the MAC address
To Next Page
Loading...
