18
The connection procedure has 3 states :
1° Symbol off disconnected mode
2° Symbol blinking advertising mode
3° Symbol on connected mode
14.1. Connection
1° Activate
Bluetooth
® compatible software and hardware (Master : PC, measuring display unit)
2° Start the instrument. By default the
Bluetooth®
module is active and the instrument is available for
connection during 120s (advertising mode)
3° As soon as the device is detected, a connection is established automatically. If no connnection is establi-
shed during 120s, reactivate the
Bluetooth
® module using the bt/ On menu.
4° Instrument is ready to communicate (connected mode)
To Next Page
Loading...
