E
19
14.2. Pairing
Pairing with master is automatically done at first connection.
To connect the instrument to a new master (new pairing), it is necessary to clear all pairing information on
the instrument using the bt / rESEt menu.
14.3. Bluetooth
®
Specifications
Radio frequency 2.4Ghz
Robustess FHSS
Latency (connection + data output) <6ms
Range Open space: up to 15m / industrial space : 1-5m
Autonomy Continuous : up to 2 months (always connected with 4 values/s
Saver : up to 5 months (The instruments sends the values when the
position changes
Blind/Push : up to 7 months (the value is sent from the instrument
(button) or asked from computer)
To Next Page
Loading...
