What to do if Sylvania SP096 Speakers have no sound?
If your Sylvania Speakers aren't producing any sound, there are a couple of things to check: * First, make sure the volume isn't set too low. Increase the volume by pressing the VOL + button. * Second, ensure that the device connected to the speaker is playing audio and that its volume is also turned up.
Why is Bluetooth reception failing on my Sylvania SP096 Speakers?
If you're experiencing Bluetooth reception issues with your Sylvania Speakers, here are a couple of possible causes and solutions: * The connected device might be too far away from the unit. Try moving the Bluetooth device closer. * The unit might not be properly paired with your Bluetooth device. Pair the unit with the Bluetooth Device as the procedures stated in this manual.
What to do if Sylvania SP096 sound distorted?
If you are experiencing sound distortion or rattle with your Sylvania Speakers, it might be due to the volume level being too high. Try reducing the volume on both the speakers themselves (by pressing the VOL - button) and the paired device.
Cautions regarding electric shock, opening the product, and laser system exposure risks.
Warnings against exposure to water, using correct accessories, and surge protector recommendations.
Instructions on ventilation, heat sources, plug/cord safety, accessory, and cart usage.
Detailed steps for pairing two units and connecting to a Bluetooth audio device.
How to answer, end, refuse, or redial calls using the main unit during Bluetooth playback.
To Next Page
General
