Product overview
3 5
4
9
6 87
DEAR CUSTOMER
In order to achieve the best performance of your product, please
read this instruction manual carefully before using, and keep it
for future reference.
NOTE
This unit may be submitted to changes in specifications,
characteristics and/or operation without prior notice to the user,
in order to continue improving and developing its technology.
Packing list
Upon opening the package, please check for the following items:
1 x Speaker
1 x Instruction manual
1 x Adaptor
1 x USB charging cable
1 x Microphone
2
Specification
Input: DC 5V
Drivers: 12”Full Range
FM: 87.5~108.0 MHz
Battery Capacity: 1500mAh
Transmission Distance: 10m
Unit dimensions: (WxHxD): 355 x 545 x 315mm
SYLVANIA is a registered trademark of
OSRAM Sylvania Inc. used under licese.
BLUETOOTH 12" TAILGATE SPEAKER
-WITH LED LIGHTING WITH
AUX/USB/TF AND FM/MICROPHONE
Model No: SPA124
INSTRUCTION MANUAL
1. Power / VOLUME -&+
3. DC interface (5V)
2. Charging Indicator
RED = Charging
Light off = Fully Charged
4. MODE / LED ON
(Long press to turn on/off
light; Lightly press to enter
into selection for Bluetooth, FM
Radio, AUX Input, USB, TF)
(TWS: Press and hold this
button, the LED display
shows: 't on' that means
TWS in pairing mode. 't off' that
5. Previous track & TWS
means TWS in pairing off mode.
'bt st' flashing that means TWS
is in the pairing mode, it will have
a tone coming out when both
speakers are connected
successfully and the display
shows 'bt' from the other speaker.
6. Play / Pause & REC
Under FM mode, short press
the Play / Pause button, it can
scan all radio stations and
save it automatically.
7. Next track
9. AUX input
10. MIC input
8. TF / USB input
1
2
3
4
5
6
7
8
9
10
MIC I N
AUX I N
DC 5V I N
VOL UME
POW ER
CHA RGING L ED
MODE / LED ON
/ TWS
/ REC
POWER SOURCE
1. Please charge the unit at least 4 hours before first time using.
2. Twist the dial clockwise/anticlockwise to switch on/off the unit.
CHARGE THE BATTERY
1. The charging LED lights on red during the battery charging.
The LED will be off after fully charged.
2. When the battery is fully charged, please disconnect the
charge cable from the speaker.
VOLUME
Twist the dial clockwise / anticlock wise to increase/discrease
the mus volume.
PREVIOUS/NEXT BUTTON
Under playing status, press PREVIOUS / NEXT button to get
back to a previous or next song.
PAUSE/PLAY BUTTON
To stop playing the current track, please press
PAUSE / PLAY button on the control panel. Press it once
again to continue playing.
MODE
Lightly press to enter into playing mode selection(Blue-
tooth, FM Radio, LINE Input, USB, TF).
LINE IN JACK
1. Connect an audio cable to the LINE IN JACK of the
speaker and to the audio output socket on the external
audio devices such as MP3 player, discman, etc, then select
LINE by pressing the MODE button on the control panel.
2. Play from an external audi o d evice.
MIC IN JACK
Plug in microphone directly for playing.
USB JACK
Insert USB card directly for playing.
TF JACK
Insert TF card dirctly for playing.
FM FUNCTION
Lightly press MODE button to switch to FM mode. Short
press PLAY / PAUSE button on control panel for automatic
searching and saving the radio stations, by pressing
PREVIOUS or NEXT you can select a previous or next
radio station.
Bluetooth:
Short press MODE button on control panel to select
Bluetooth mode. Simultaneously turn on the Bluetooth setting
on your phone, tablet or any other bluetooth enabled audio
device and select "Syl SPA124" (no need to match code), the
damage to the product resulting from accident, alteration,
abuse, or misuse. This warranty extends only to the original
consumer purchaser or gift recipient. Keep the original sales
receipt, as proof of purchase is required to make a warranty
claim. This warranty is void if the product is used for other than
single-family household use or subjected to any voltage and
waveform other than as on the specified rating on the label
(e.g., 120V~60Hz).
This product is warranted to be free from defects in material
and workmanship for a period of ninety (90) days from the date
of original purchase. During this period, your exclusive remedy
is repair or replacement of this product or component found to
be defective, at our option; however, you are responsible for all
costs associated with returning the product to us. If the product
or component is no longer available, we will replace with a
similar one of equal or greater value. Prior to a replacement
being sent, the product must be rendered inoperable or
returned to us.
This warranty does not cover glass, filters, wear from normal
use, use not in conformity with the printed directions., or
90 day Warranty
is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that maycause undesired operation.
We exclude all claims for special, incidental, and consequential
damages caused by breach of express or implied warranty. All
liability is limited to the amount of the purchase price. Every
implied warranty, including any statutory warranty or condition
of merchantability or fitness for a particular purpose, is
disclaimed except to the extent prohibited by law, in which
case such warranty or condition is limited to the duration of this
written warranty. This warranty gives you specific legal rights.
You may have other legal rights that vary depending on where
you live. Some states or provinces do not allow limitations on
implied warranties or special, incidental, or consequential
damages, so the foregoing limitations may not apply to you.
For faster service, locate the model, type, and serial numbers
on your appliance.
For service assistance and product information,
please call: 1-800-968-9853.
Curtis International Ltd.
7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON,
L5S 2A3 www.curtisint.com
unit and device will then connected via Bluetooth. Press the
"NEXT SONG" and "PREVIOUS SONG" button on the
control panel to select the song, press " PLAY / PAUSE"
button to control the playing status.
TWS: (True Wireless Speaker)
It needs two speakers to make a TWS. When you had two
speakers, you can make a TWS as below steps:
1. Don't connect any Bluetooth devices to this speaker.
2. Turn on both speakers and press the mode button to change
to Bluetooth mode.
3. Press and hold this button, the LED display shows: 't on',
please wait for a few minutes, 'bt st' flashing that means TWS
is in the pairing mode, it will have a tone coming out when both
speakers are connected successfully and the display shows
FCC Statement
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
'bt' from the other speaker. If you want it disconnect,
please press and hold this button again.
4. Turn the Bluetooth devices to search the Bluetooth name
“Syl SPA124" and tap to connect it. It will have a tone coming
out from this speaker after connected successfully.
5. Now you can play the music form your Bluetooth devices.
Playing recording function
1. After the portable speaker is turned on, insert the TF Card
or U disk to the TF slot or USB port, press the Mode button
to the Bluetooth mode, connect it with your Bluetooth device
and paly the music, long press the play / pause button
around 3 seconds, you will here a prompt voice "ding"
means the TF card / USB is starting recording, long press
the play / pause button for 3 seonds again and you will here
prompt voice "ding ding", that m e ans stop recording.
2. If you want to play this recording sound, press the Mode
button to the USB or TF card mode, press the next button to
find out this song and play it.
Note :
a) When your TF card and U disk insert to the speaker at
same time , it will record to your U disk when recording.
b) The recording only works in Bluetooth mode, can not
record in FM and AUX mode.
c) It's better to turn the Bleutooth devices volume to maximum
during recording.
d) It will be stopped recording when pressing the mode button
during recording.
e) It can't pause and can't go to next track or previous track
during recording.
To Next Page
Need help?
General
