10
Bluetooth Operation
Bluetooth Operation
1. If the unit has never been paired with a Bluetooth device before, you need to follow the
pairing instructions below to link the SRCD1037BT with your Bluetooth device.
• Press the POWER button to turn on the unit.
• Press and toggle the FUNCTION button to select Bluetooth mode. The unit will
search the paired device with the “BLUETOOTH” Indicator lit.
• Press and hold the STOP/PAIR Button for 4~5 seconds. Then the “BLUETOOTH”
Indicator is flashing, the unit will go into Pairing/Discoverable mode.
• Turn on the Bluetooth function of your Bluetooth device and enable the search or
scan function to find the unit.
• Select "SRCD1037BT " from the device list when it appears on your device screen.
If required, enter the pass code “0000” to pair (link) the unit with your device.
• After successfully pairing (linking) the Bluetooth enabled device the “BLUETOOTH”
Indicator steadily and a short beep will hear.
Note: If you can’t pair the unit with your Bluetooth enabled device, you can try to turn Off &
On the power of your unit to solve the problem.
Radio Operation
The unit is designed to receive FM Stereo / FM and AM radio bands.
1. Switch and toggle the FUNCTION button on the top of the unit to switch to AM or FM
mode.
2. Adjust the TUNING knob on the top of unit to tune the frequency of desired radio station.
3. To turn off the unit power, press the STANDBY button to switch off the unit.
To Next Page
Loading...
