11
AUX IN Operation
Setting up (AUX IN) connection
AUX-IN jack will allow you to connect external music player or external sound source to the
main unit.
1. Turn on the unit and slide the function switch to CD/AUX.
2. Plug into a 3.5mm audio cable (not included) into your external music player and
connect the other end (3.5mm jack) into the AUX IN jack on the top of the unit.
3. Make sure your external music player is turned on and start music playback on the
music player
4. Adjust VOLUME knob to control the sound level of music playback from the speakers
on the unit.
Specifications
Power Output 1.5 watt RMS x 2 channels
AC Power AC120V~60Hz
Battery Size UM-2 or C-Size batteries x 6 PCS
Radio Frequency FM: 87.5 – 108MHz, AM: 520- 1710 kHz
To Next Page
Loading...
