Sym Tonik 50 - Page 27

24
17. SPECIFICATION
17.SPECIFICATION
Model
Item Specification
FW11A1-6(Tonik 125)
Length 1735mm
Width 710mm
Height 1040mm
Wheel base 1240mm
Net Weight 97kg
Type 4- stroke single cylinder engine
Fuel Unleaded (Octane 90 or higher)
Cooling type Air-cooled
Displacement 125 c.c.
Compression ratio 10.5 :1
Max. HP 5.0 kw/7500 rpm
Max. torque 6.8 N.m/6000 rpm
Idle speed 1700±100 rpm
Valve clearance: IN/EX 0.12 mm/ 0.12 mm
Starting methods Electrical & foot type
Front shock absorber Telescope
Rear shock absorber Unit swing
Clutch Centrifugal type
Transmission C.V.T.
Front tire 90/90-10
Rear tire 90/90-10
Wheel Aluminum
Tire pressure
Front: STD 2.00 kg/cm
2
,
Rear: STD 2.00kg/cm
2
for 1 person, 2.25kg/cm
2
for 2 persons
Front brake Disk type (Ø 160 mm)
Rear brake Drum type (Ø 110 mm)
Front light bulb (high, low) 12V 35/35W×1
Position light bulb 12V 5W×1
Brake light bulb (tail light) 12V 21W/5W×1
License light bulb 12V 5W
Turn signal light bulb Front：12V 10W×2/ Rear：12V 10W×2
Speedometer light bulb 12V 1.7W
Engine oil capacity 0.75 L (0.60 L for change)
Transmission oil capacity 110c.c (100c.c for change)
Fuel tank capacity 5.8L
Fuel tank material Steel
Fuse 10A×2&15A×2
Spark plug A7RC
Battery capacity 12V 6Ah(closed type, maintenance-free battery)
Air cleaner Paper type
Fuel tank cap Close lock type
Rear grab frame Can not load cargo