9
7. USE OF EACH COMPONENT
y Horn Switch
Press this button down when ignition switch is in the “ON” position, the horn will sound.
y Turn Signal Switch
Turn signal lights are used when turning left/right or changing lane.
Turn ignition switch to the “ON” position, and slide the turn signal switch to left or right . Then, the turn
signal lights will flash.
To release, simply return the turn signal light button to the original position.
Left -side turn signal light flashing means you intend to make a right turn.
Right-side turn signal light flashing means you intend to make a left turn.
§STORAGE BOX§
y This box is located under the seat.
y Maximum load capacity:5kg.
y Do not store valuables in the box.
y Make sure that the seat has been locked completely after it
was pressed down.
y Take out valuables before washing to avoid wetting these
objects.
y Do not place thermal sensitive objects in the box because of
engine’s heat and high temperature.
Storage box
To Next Page
Loading...
