Contents
1.0 Important safety information
2.0 About this product
2.1 Specifications
2.2 Remote control boat components
2.3 Function of remote control components
2.4 Battery charge of the remote control boat
2.5 Spindle tube oiling
3.1 Remote control and boat model pairing
3.2 Function operation
3.0 Remote control guide
4.0 Accessories list
5.0 Contact Us
2
3
10
12
3
4
4
5
10
10
8
1
1. The boat will automatically be powered on when launched in water, and can be connected
directly to the remote control.
2. The effective remote distance is up to 50 meters, otherwise the boat will be out of control.
3. The boat can be driven for about 20 minutes.
4. The boat does not have an automatic capsize function, so be careful not to capsize the boat or
hit an obstacle when controlling it.
5. When the boat is operating, make sure there are no weeds and other debris to avoid tying up the
propeller.
6. The navigation rudder needs to be adjusted manually.
7. Low-voltage alarm warning: When the battery runs low, the remote control lights will flash and
sound a “Di di di” alarm. (When the alarm sounds, please sail the boat back immediately to
prevent the boat from running out of power on the way back)
8. As the boat is equipped with an automatic on/off switch, you must lift the boat out of the water
and remove the battery each time after use; and clean it with a dry soft cloth. (Notice: Do not place
the boat in the water with electricity after use)
Main features
13
EN
To Next Page
Loading...