SYMA S100 - Repair and maintenance; Aircraft components; Remote controls button function description; Helicopter charging

-2
Aircraft components
Remote control’s button function description:
Repair and maintenance
1.Use dry and soft cloth to clean this product.
2.Avoid exposing this product to heat.
3.Do not immerse this product in water, otherwise, the electronic parts will be
damaged.
4.Transformers used with the toy are to be regularly examined for damage to the
cord,plug,
enclosure and other parts,and that,in the event of such damage,the toys must be
used with this transformer until the damage has been repaired.
Helicopter charging
②
②
① Power switch
② Up/Down
③Forward/Backward
Turn Left/Turn Right
④Take-off/landing
⑤Turn right trimmer
⑥Turn left trimmer
③
③
④
④
⑤
⑤
①
①
⑥
⑥
English
Charging helicopter with USB: Take out the
USB charging wire,connect the USB wire to
the computer interface. then connect the
other USB charging wire to the helicopter
interface. During charging, the indicator of
USB charging wire will be OFF. When it fully
charged, the indicator will be ON.
Charging time: about 20 minutes ;Flying time: about 5 minutes
Note:Make sure helicopter power switch to OFF position when charging.
① Balance bar
② Main blades
③Tail assembly
④ Landing gear
⑤ Main frame
⑥Headcover-Blue