SYMA S100 - To start the helicopter; Method one; Method two; Flight control

-4-
Method one Method two
Flight control
To start the helicopter
English
Horizontal
position
TIPS: When matching signal, keep
the helicopter on horizontal
position for faster matching
and starting start a stable flight.
After starting the helicopter, pushing
the left joystick to the highest point
and then returing to the centre, the
helicopter blades rotate slowly.
When the helicopter is at rest, press
the one key button and the helicopter
blades will automatically rise to a
certain height after slowly rotating.
Ascend
Descend
Move forwards
Move backwards
Rotate
right
Rotate
left
If helicopter rotates clockwise…
Continually push right R/C calibration
until excessive turning stops.
If helicopter rotates counter-clockwise
…Continually push right R/C calibration
until excessive turning stops.
Helicopter Control Scheme