QUICK SETUP GUIDE
Congratulations on your purchase of a Symphonic DVD/VCR. This Quick Setup Guide takes
you through the first-time setup with simple instructions so you can enjoy exceptional audio and
video quality as soon as possible. Please refer to the Owner's manual for detailed instructions.
Unless stated, all procedures described use the remote control.
2)
Insert two R6 (AA) batteries,
with the (+) and (-) ends
in the correct positions.
WARNING!
Never make or change connections with
the power switched on.
1)
Disconnect the antenna or cable from the
TV and connect it to the AERIAL jack of the
unit.
2)
Connect the RF OUT jack of the unit
to the antenna in jack of the TV using the
supplied RF cable.
3)
Connect the AV1 (TV) scart jack of the
unit to the scart input jack of the TV
using the supplied scart cable.
4)
Plug in the TV and the unit.
Connecting to a TV
Loading Batteries in the Remote Control
1)
Open the battery cover.
3)
Close the cover.
RF OUT
AERIAL
VCR
AV2 (DECODER)
DVD/VCR AV1 (TV)
L
R
DVD
OPTICALCOAXIAL
DIGITAL
AUDIO OUT
ANALOG
AUDIO OUT
S-VIDEO
OUT
VHF/UHF
MIXER
UHF
VHF
RF cable
(supplied)
scart cable
(supplied)
(TV)
to 21-pin
scart jack
to aerial socket
1VMN22596 *****PAL I_EN
Note:
• Playback picture from DVD and VCR
cannot be delivered through the RF
cable. The RF cable is only for sending
the antenna signal to the TV.
Only for the
model with
OPTICAL jack
3)
Press and confirm that the DVD OUTPUT indicator is lit.
If not, press to switch to DVD mode.
4)
Press to open the disc loading tray and place the disc on
the tray, with the label side up.
5)
Press .
The tray will close automatically and playback will start.
• For DVDs with a title menu recorded, the screen will display the title.
6)
Press to stop playback.
Note:
• A “prohibited icon” may appear at the top-right on the TV screen during operation,
warning that a prohibited operation has been encountered by this unit or the disc.
Loading and Playing a DVD
1)
Tu rn on the TV, amplifier and any other components connected to the unit.
2)
Set the TV and audio receiver (commercially available) to the correct channel.
Help Line: 0870 383 3010 in the UK.
Questions and Help on this products, please call
To Next Page
Need help?
General
