To Next PageTo Next Page
Need help?Do you have a question about the Symphony DiET 35 and is the answer not in the manual?
Take the cooler out from carton, remove all protective covers. Place the cooler in front of an open window or install in a window for effective cooling.
Disconnect power cord, pour water by lifting lid or through front/spout. Add ice cubes for faster cooling. Use float valve for automatic filling.
Plug in to power source and switch on.
Switch on pump with control knob in cool position, airflow control in OFF. Wait for pad to get wet.
Set controls like Cool, Swing, Fan speed (High, Med, Low) as desired.
For maximum air and cooling, turn the air flow control to 'High'.
Adjust horizontal louver manually as desired.
Sit back and enjoy.
Press the button to switch Power On and Off. Power icon will appear on LCD.
Set ON or OFF timer for the cooler in intervals of 30 minutes up to 12 hours.
Press button to switch the pump ON/OFF. Cool icon appears on LCD. Pump requires sufficient water.
Increase or decrease fan speed from level 1 to 8 using +/- buttons.
Press button to switch the swing function on or off. Swing icon will glow when active.
Speed varies randomly to simulate natural breeze.
Switch the Ionizer function ON and OFF (available in selected models).
This cooler must be moved only by properly holding the handle (given on top).
Last setting is memorized for all the functions.
Disconnect the power cord before servicing or maintenance to avoid hazard.
Do not make loose wiring or use inferior material to avoid fire hazard during servicing.
Stop device and contact authorized provider if electric shock is found on cooler.
Disconnect power supply before opening any cover to avoid injury from rotating parts or electric shock.
Remove drain plug from bottom to drain residual water for hygiene. Push plug back after draining.
Unplug cooler and clean cooling pad with water from outside at least once a year.
Under no circumstances should the customer open the cooler.
In case of difficulties, please contact Symphony authorized service provider.
Check if pump is OFF or humidity control is OFF. Switch ON the pump or humidity control.
Ensure drain plug is positioned properly and grill lock is engaged. Relock the grill.
Check airflow switch, cooling pad condition, and socket contact. Switch ON fan or check wiring.
Check for device malfunction or loose socket contact. Call the nearest service provider.
Wiring diagram for Kaizen, Kaizen Jr., and Sumo Jr. models.
Wiring diagram for various Class II models including Jumbo, Winter, Hi Cool, and Diet series.
Wiring diagram for Storm 100 i and Storm 70 i models.
Wiring diagram for Diet and HiCool Smart models with various variants.
Unplug and disconnect cooler from power source before any maintenance, service or cleaning.
Do not operate with a damaged cord/plug. Replace by manufacturer or qualified person.
Connect only to an outlet with a ground fault circuit interrupting device (ELCB) to avoid electric shock.
Not for use by children or persons with reduced capabilities, unless supervised or instructed.
Children must not be allowed to play with the cooler.
Not intended for locations with corrosive or explosive atmosphere (vapour or gas).
Do not dispose of product with household waste. Recycle responsibly or contact local authorities.
Symphony cooler works on inverter. The inverter should be of sine-wave type of appropriate rating.
Details terms and conditions for the limited warranty, including purchase validation and product use.
Lists conditions under which the warranty is void, such as unauthorized alterations or commercial use.
Information on how to register the warranty and obtain service, including contact details and procedures.
Take the cooler out from carton, remove all protective covers. Place the cooler in front of an open window or install in a window for effective cooling.
Disconnect power cord, pour water by lifting lid or through front/spout. Add ice cubes for faster cooling. Use float valve for automatic filling.
Plug in to power source and switch on.
Switch on pump with control knob in cool position, airflow control in OFF. Wait for pad to get wet.
Set controls like Cool, Swing, Fan speed (High, Med, Low) as desired.
For maximum air and cooling, turn the air flow control to 'High'.
Adjust horizontal louver manually as desired.
Sit back and enjoy.
Press the button to switch Power On and Off. Power icon will appear on LCD.
Set ON or OFF timer for the cooler in intervals of 30 minutes up to 12 hours.
Press button to switch the pump ON/OFF. Cool icon appears on LCD. Pump requires sufficient water.
Increase or decrease fan speed from level 1 to 8 using +/- buttons.
Press button to switch the swing function on or off. Swing icon will glow when active.
Speed varies randomly to simulate natural breeze.
Switch the Ionizer function ON and OFF (available in selected models).
This cooler must be moved only by properly holding the handle (given on top).
Last setting is memorized for all the functions.
Disconnect the power cord before servicing or maintenance to avoid hazard.
Do not make loose wiring or use inferior material to avoid fire hazard during servicing.
Stop device and contact authorized provider if electric shock is found on cooler.
Disconnect power supply before opening any cover to avoid injury from rotating parts or electric shock.
Remove drain plug from bottom to drain residual water for hygiene. Push plug back after draining.
Unplug cooler and clean cooling pad with water from outside at least once a year.
Under no circumstances should the customer open the cooler.
In case of difficulties, please contact Symphony authorized service provider.
Check if pump is OFF or humidity control is OFF. Switch ON the pump or humidity control.
Ensure drain plug is positioned properly and grill lock is engaged. Relock the grill.
Check airflow switch, cooling pad condition, and socket contact. Switch ON fan or check wiring.
Check for device malfunction or loose socket contact. Call the nearest service provider.
Wiring diagram for Kaizen, Kaizen Jr., and Sumo Jr. models.
Wiring diagram for various Class II models including Jumbo, Winter, Hi Cool, and Diet series.
Wiring diagram for Storm 100 i and Storm 70 i models.
Wiring diagram for Diet and HiCool Smart models with various variants.
Unplug and disconnect cooler from power source before any maintenance, service or cleaning.
Do not operate with a damaged cord/plug. Replace by manufacturer or qualified person.
Connect only to an outlet with a ground fault circuit interrupting device (ELCB) to avoid electric shock.
Not for use by children or persons with reduced capabilities, unless supervised or instructed.
Children must not be allowed to play with the cooler.
Not intended for locations with corrosive or explosive atmosphere (vapour or gas).
Do not dispose of product with household waste. Recycle responsibly or contact local authorities.
Symphony cooler works on inverter. The inverter should be of sine-wave type of appropriate rating.
Details terms and conditions for the limited warranty, including purchase validation and product use.
Lists conditions under which the warranty is void, such as unauthorized alterations or commercial use.
Information on how to register the warranty and obtain service, including contact details and procedures.
General| Brand | Symphony |
|---|---|
| Model | DiET 35 |
| Category | Air Conditioner |
| Language | English |
