Symphony Diet 8i BU - Page 2

How to install and operate cooler
=P
Take the cooler out from carton, Remove all protective
covers. Place the cooler in front of an open window or
install in a window for effective cooling. Selected
Models can also be placed on trolleys. Do not use
cooler inaclosed room.
Ensure power supply is as specified for the cooler.
There should not be any spikes in supply voltage.
Disconnect the power cord while filling the water. As
per the provision in your model, pour water through
water inlet door. You may also add ice cubes for faster
cooling. Water can be poured up to the highest point
(or MAX) of the water level indicator. You may keep a
small container below over flow hole, to avoid spillage
of water on your floor/carpet. For longer life of pump,
always operate it with sufficient water in the tank.
FLOAT VALVE
A
Float valve facility is available in selected models. This
feature makes provision for automatic water filling of
the cooler. Ensure proper connection of water inlet
pipe into the float valve to avoid leakage.
Plug in to power source and switch on.
Keep the doors & windows open for optimum cooling
performance. always keep the cooler in front of an
open window.
[2]
Sit back and enjoy.