SYNAPTICON SOMANET Node 1000 - Page 61

Attention
The STO-function does not provide electrical isolation from the mains supply. If electrical
changes need to be carried out on the system (e.g. modifying the motor cabling), the servo drive
shall be completely isolated from mains supply with a mechanical switch.
Hardware Manuals / SOMANET Node / SOMANET Node rev. E.1
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.10.2 | Built 2021-07-06 61/67