Sample B.1
Overview Circulo Sample B.1
Technical specifications
Installation guide
Wiring instructions
Power supply, phases and brake
Encoders and IO
Temperature sensor
Hybrid EtherCAT-STO Cable
Mating parts
Dimensions and mechanical mounting
Mounting the encoder rings
Mounting a bearing
Encoder accuracy
Encoder Calibration
LED signals
Safety functions (STO-SBC)
Specifications of the safety functions
Safety connectors
Wiring the safety inputs
Using the safety functions
Examples for realising safety functions
Emergency stop
Stop category 1 emergency stop (Safe stop 1)
Prevention of unexpected start-up
Commissioning and maintenance
Changelog of the safety-related documentation
To Next Page
Loading...
Need help?
General
