[2] All Analog Inputs can be configured as single-ended 0-5 V, 0-10 V, 0-20 V or differential ±5 V,
±10 V independently. Upon request only, please contact sales@synapticon.com
[3] Upon Request
[4] Two Digital IO can be configured as 5.0 V CMOS logic. Upon request only, please contact
sales@synapticon.com
[5] Depends on the firmware used. Value given for v4.1
[6] The actual lowest temperature is limited by the dew point. This depends on several factors,
e.g. the ambient humidity and how quick the drive cools down after operation. Special care
must be taken when the servo drive is actively cooled below ambient temperature.
To Next Page
Loading...
