In Program 900-924, the unit goes On-hook and the input is through the
Music-In socket on the front panel. Hence 900-924 may be used only when
the unit is located physically close to the PC on which the prompt file is
being played.
The 900-924 programs are expected to give a better quality recording of
the prompts since the noise and bandwidth limitations of the Telephone
line are not present as in the case of Program numbers 700-724.
Program # 970: The previously saved Installer Program parameters are
loaded from NVRAM (Non-Volatile RAM). If these parameters have not been
saved earlier, the unit prompts “This entry is invalid”.
Program # 980: All the Installer Program parameters are saved in NVRAM
separately.
53
To Next Page
Loading...