11
Genuine TAG filter
The genuine TAG filter has no reset function. When the filter replacement time comes,
the filter number graphic shows 0000 and the filter change icon flashes.
“Replace the filter” announces and enters to the filtered water mode.
The machine will not function until the filter has been replaced with a genuine filter.
Please replace filter when any one of the flowing occur:
When the water no longer tastes clean and pure.
Excessive odor in the water and/or severely decreased flow rate
After prolonged period of inactivity more than 30 days.
(You can remove the filter an put in the refrigerator if going away from the machine)
If the filter has been in use for over 1 year.
7
Turn the master power switch to
the ON position, Located on back
of machine.
8
After pressing the filtered button in
the standby mode, check for any
leakage by flowing water for 2 ~ 3
minutes, if there are no leaks you
can now close the filter cover.
To Next Page
Loading...