10
Change of genuine filter
OFF
ON
1
When the filter reaches the end of
its life, the filter life indicator shows
0000, the filter replace icon will then
light up, and the voice message will
say "Replace filter"
2
Turn off the power switch on the back
of the machine and shut off the water.
34
5
Place the genuine filter with the arrow
pointing toward the front, fit it into the
groove below, and push it in.
- Check for leaks after replacing the filter.
If there is a leak, check the “O”ring to
verify it is not damaged, cracked, or needing
to be lubricated.
Pull the filter cover forward to
remove it
Push down on the top of the filter, then
pull it out. to words you.
6
Match the direction of the arrow shown
at the top to the direction of the arrow
on the filter
How to replace the filter
If the arrows are not lined up, the machine
will not recognize the filter genuine.
Filter Sticker
To Next Page
Loading...