Synology DiskStation DS214 Plus - Chapter 2: Hardware Setup; Tools and Parts for Drive Installation; Install Drives

6
Chapter
2
Chapter 2: Hardware Setup
Tools and Parts for Drive Installation
 A screwdriver (only for 2.5 drives)
 At least one 3.5” or 2.5” SATA drive (please visit www.synology.com for compatible drive models)
Warning:
Install Drives
If you install a drive that contains data, the system will format the drive and erase all existing data. Please
back up any important data before installation.
1 Press the lower part of the drive tray to pop out the handle.
2 Pull the drive tray handle in the direction indicated below to remove it.