Synology DS1621+ - Chapter 4: Install DSM on Synology NAS; Installing DSM via Web Assistant

21
After hardware setup is completed, please install DiskStation Manager (DSM) – Synology's browser-based
operating system – on your DS1621+.
Install DSM with Web Assistant
Your DS1621+ comes with a built-in tool called
Web Assistant
that helps you download the latest version of DSM
from the Internet and install it on your DS1621+. To use Web Assistant, please follow the steps below.
1
Power on your DS1621+.
2
Open a web browser on a computer connected to the same network as the DS1621+.
3
Enter either of the following into the address bar of your browser:
a nd.synology.com
b synologynas:5000
4
Web Assistant will be launched in your web browser. It will search for and nd the Synology NAS within the
local network. The status of the DS1621+ should be
Not Installed
.
DS1621+
5
Click
Connect
to start the setup process and follow the onscreen instructions.
Note:
• The Synology NAS must be connected to the Internet to install DSM with Web Assistant.
• Recommended browsers: Chrome, Firefox.
• Both the Synology NAS and the computer must be in the same local network.
6
If you accidentally leave the installation process before it is nished, sign into DSM as
admin
(default
administrative account name) with the password left blank.
Learn More
Your DS1621+ is now ready for action. For more information or online resources about your DS1621+, please
visit
www.synology.com
.
Install DSM on Synology NAS
4
Chapter