Need help?Do you have a question about the Synthes USS II and is the answer not in the manual?
Overview of available USS II system implants, including materials and sizes.
List of surgical instruments required for USS II system procedures.
References to related surgical techniques and publications for the USS II system.
Detailed steps for assembling the handle and surgical stick component.
Procedure for assembling rods with implants using specialized tools like the 'Persuader'.
Definition of the USS II system's primary purpose and application scope.
Conditions and spinal deformities for which the USS II system is recommended.
Situations and patient conditions where the USS II system should not be applied.
Tools and equipment necessary for handling USS II system implants with the stick.
Step-by-step guide for connecting the handle to the surgical stick.
Procedure for securely gripping and picking up a surgical implant using the stick.
Instructions for detaching the handle from the implant-mounted stick.
List of instruments specifically required for the pedicle screw insertion procedure.
Guidance on selecting the correct anatomical entry point and screw angle.
Process for preparing the pedicle and measuring the appropriate screw length.
Instructions for probing the pedicle channel to verify its integrity and path.
Description of using pedicle markers for radiographic verification of position and alignment.
Step-by-step instructions for inserting the pedicle screw into the prepared bone.
Tools and equipment needed for correctly positioning pedicle hooks.
Procedure for preparing the anatomical site to ensure proper pedicle hook seating.
Step-by-step guide for placing the pedicle hook onto the pedicle.
Procedure for drilling the required screw hole for securing the pedicle hook.
Instructions for inserting the screw to fix the pedicle hook in place.
List of instruments required for positioning lamina hooks.
Guidance on preparing the lamina to ensure optimal seating of the lamina hook.
Step-by-step instructions for placing the lamina hook onto the lamina.
Tools required for the correct positioning of angled lamina hooks.
Procedure for preparing the anatomical site for angled lamina hook placement.
Detailed steps for positioning angled lamina hooks accurately.
List of instruments used for shaping and bending USS surgical rods.
Instructions on how to contour and bend the USS rods according to surgical needs.
Method for sequentially placing sleeves and nuts to secure implants to rods.
Procedure for simultaneously placing sleeves and nuts for implant fixation.
Utilizing rod introduction pliers for efficient rod insertion and implant fixation.
Step-by-step guide for firmly tightening the implant nut using standard tools.
Procedure for precise nut tightening utilizing a torque-limiting device.
Techniques for applying distraction or compression between adjacent implants.
Method for using fixation rings to stabilize implants during distraction or compression.
Alternative method using holding forceps for rod stabilization during distraction/compression.
List of instruments required for anterior vertebral body screw placement.
Process for preparing the screw hole and measuring the correct screw length.
Procedure for placing flat or angled washers prior to screw insertion.
Specific steps for inserting angled washers and associated vertebral body screws.
Tools required for attaching the anterior connecting clamp.
Procedure for positioning and initially securing the anterior connecting clamp.
Steps for pre-drilling the screw hole through the anterior connecting clamp.
Instructions for inserting the screw into the pre-drilled hole for the clamp.
Procedure for the final tightening of the anterior connecting clamp's set screw.
List of instruments utilized when working with rod connectors.
Procedure for securely attaching the rod connector onto the surgical rod.
Steps for connecting the assembled rod connector to the spinal implant.
Method for connecting two 6 mm rods using cross-link clamps for stability.
Procedure for connecting two 6 mm rods using low-profile transverse connectors.
Method for connecting two 5 mm rods using transverse connectors for stabilization.
General| Brand | Synthes |
|---|---|
| Model | USS II |
| Category | Medical Equipment |
| Language | English |
To Next Page
