Need help?Do you have a question about the Synthes UNIUM and is the answer not in the manual?
Details the UNIUM™™ Modular Handpiece specifications, capabilities, and compatibility.
Details the UNIUM™™ Reciprocating Saw Handpiece specifications, capabilities, and compatibility.
Details the UNIUM™™ Power Unit, sterile cover, adapter, and battery charger.
Details the UNIUM™™ washing and sterilization baskets for handpieces.
Covers portfolio, intended use, user, indications, target group, and expected benefits.
Addresses adverse events, pathogens, reprocessing, safety measures, and storage.
Outlines servicing, warranty terms, and critical safety warnings for device operation.
Explains the operation of the modular handpiece, including modes and warnings.
Details operation, blade insertion, sternum top mounting, and battery check.
Explains power unit indicators, self-test, charging procedures, and storage.
Covers safe usage, aseptic insertion, and removal of the power unit.
Instructions for connecting, disconnecting, and safely handling attachments.
Details AO/ASIF, Drill Chuck, Mini Quick, and J-Latch couplings for drilling.
Describes Quick Coupling, DHS/DCS Triple Reamer, and Ream Chuck attachments.
Covers screw attachments and quick coupling for Kirschner Wires.
Details the burr attachment, its compatibility, and changing burrs.
Explains oscillating saw attachments and their operation.
Explains coupling, drill bit insertion/removal, and usage of the Radiolucent Drive.
General guidelines for device care, safety, handling, and reprocessing.
Step-by-step instructions for manual cleaning of handpieces and attachments.
Details manual pre-cleaning, loading baskets, and automated cleaning cycles.
Covers lubrication of handpieces/attachments and device inspection.
Guidelines for packaging, sterilization, storage, and disposal of devices.
Specifies duty cycles, standards, environmental conditions, and transport requirements.
Declares emission sound pressure, sound power, and vibration levels.
Covers EMC standards, immunity guidelines, and RF separation distances.
Explains various symbols used for operating the UNIUM device.
Explains general symbols, certifications, and regulatory markings.
Provides solutions for common problems encountered with the UNIUM device.
Lists all UNIUM components, their part numbers, and compatibility.
General| Category | Medical Equipment |
|---|---|
| Material | Titanium |
| Compatibility | Compatible with various orthopedic implants and instruments |
| Usage | Single-use |
| Features | Universal design for femur, tibia, and humerus |
| Components | Nails, locking screws, end caps, insertion instruments, targeting devices |
To Next Page