Master Language is English Hot Runner System Installation Guide SVC-17-0001_EN-Rev11
RESTRICTED: Property of Synventive. - 393 - All rights reserved. Errors and omissions excepted
For limited third party distribution based on need and intended use. © 2019 Synventive Molding Solutions
H O T R U N N E R T E C H N O L O G Y
Hot Runner System Installation Guide
Service and Maintenance / Single Axis Valve Gate Nozzle 16SVH
Doc007291.png
9) Screw in the isolation nut (1) at the
nozzle head top (3).
10) Check the clearance of the cooling
bar (6).
11) Fix the nozzle at the isolation nut (1) in a vice.
12) Fasten the isolation nut (1) at the nozzle tip (12).
NOTICE
Torque value - 40 Nm
Doc007381.png
To Next Page
Loading...