27
V. Advanced configuration
Connect your device to a computer with the SYS PC Tool, you get access to advanced setup.
You can :
- Adjust the security alarm based on the G-meter.
- Modify the filtering time (integration) of the vario.
- Choose the units and the language of your instrument.
- Change any setup that is changeable inside the instrument.
An explanation of those functions is explained here: https://www.syride.com/en/support
For this :
1) Turn-on the instrument and connect it to your computer
2) From SYS PC Tool, click on “configure my instrument” icon.
3) Change whatever you want.
4) Click on Send parameters.
To Next Page
Loading...
