System Sensor SSM24-6 - User Manual

D770-11-00 1 I56-0674-008R
SSM and SSV BELL Series
INSTALLATION AND MAINTENANCE INSTRUCTIONS
3825 Ohio Avenue, St. Charles, Illinois 60174
1-800-SENSOR2, FAX: 630-377-6495
www.systemsensor.com
Important
Please Read Carefully and Save
This instruction manual contains important information
about the installation and operation of bells. Purchasers
who install bells for use by others must leave this manual
or a copy of it with the user.
System Sensor supplies bells for nearly all sprinkler/fire
alarm/burglar applications.
These instructions apply to all System Sensor bells in the
series. Read all instructions carefully before beginning.
Follow only those instructions that apply to the model you
are installing.
Specifications
SSM Series:
Voltage: Regulated 24 VDC
Operating Voltage Limit: 16 - 33 VDC
Maximum Current: DC - 31.1mA/FWR - 53.5mA
Operating Temperature: –31° to 150°F (–35° to +66°C)
SSV Series:
Voltage: Regulated 120 VAC
Operating Voltage Limit: 96 - 132 VAC
Maximum Current: 53mA
Operating Temperature: –31° to 150°F (–35° to +66°C)
UL Reverberant Room
Sound Output per UL 464 (dBA)
24 VDC SSM
SSM24-6 (6″, 24 VDC, P, S) 82
SSM24-8 (8″, 24 VDC, P, S) 80
SSM24-10 (10″, 24 VDC, P, S) 81
120 VAC SSV
SSV120-6 (6″, 120 VAC) 85
SSV120-8 (8″, 120 VAC) 82
SSV120-10 (10″, 120 VAC) 82
P = Polarized
S = Suppressed
NOTE: All SSM Series DC bells were only tested at the
16–33 Volt-DC/FWR limits. All SSV Series AC bells were
only tested at the 96–132 Volt AC limits. This does not
include the 80% low-end or 110% high-end voltage limits.
General Description
The National Fire Protection Association has published
codes, standards, and recommended practices for the
installation and use of the above appliances. It is recom-
mended that the installer be familiar with these require-
ments, with local codes, and any special requirements of
the authority having jurisdiction.
These bells are intended to be connected to alarm indicat-
ing circuits of UL listed fire alarm control panels. The SSM
series is polarized to enable supervision of the installation
wiring. The SSM bells require 24 VDC and the SSV bells
require 120 VAC.
CAUTION
Do not use in potentially explosive atmospheres.
Do not leave any unused wires exposed.

Summary

SSM and SSV Bell Series

Specifications and Performance

Details operating voltage, current, temperature, and UL sound output (dBA) for bell series.

Important Notes and General Description

Provides user guidance, general description, and safety cautions for bell installation and use.

Installation, Testing, and Maintenance

Installation Procedures and Safety

Covers bell installation steps, mounting, wiring, and safety warnings.

Operational Testing and Measurement

Explains periodic testing, maintenance advice, and audibility measurement methods.

Product Limitations and Warranty

Limitations of Alarm Devices

Details conditions affecting bell performance, audibility, and operational reliability.

Three-Year Limited Warranty

Outlines the warranty coverage, duration, and claim process for System Sensor bells.

System Sensor SSM24-6 Specifications

General

Brand	System Sensor
Model	SSM24-6
Category	Security System
Language	English