SystemAir E 28 User Manual

5
The display
shows
1.
2.
3.
6.
1.
2.
3.
4.
5.
6.
The display is lit up
Temperature
The system is congured to control a
certain temperature. The actual value and
set point for this temperature is shown.
Access code 1111 may be necessary.
Set point temperatures for outdoor tempe-
rature compensation are shown. The control
curve is dened with 8 node points. Only 2 or
3 node points are shown in the display, and
the remaining node points are displayed by
scrolling and .
Temperatur
To return to the start menu at once
– press and several times.
Select and conrm new set point tempera-
ture.
The system will automatically return to the
start menu after some minutes.

x 1
x 2
x 1
x 1
x 1
x 2
4.
5.
Setting of temperature
Value to be changed ashes.
Value to be changed ashes.
Select one new set point temperature
for each outdoor temperature shown on
the curve and conrm selected value with
OK.The system will automatically return to
the start menu after some minutes.
Act: xx.x ˚C Setp
Setp: yy.y ˚C
Setp: yy.y ˚C
Outdoor comp Setp.
xx ˚C = zz.z ˚C
yy ˚C = vv.v ˚C
Outdoor comp. Setp
xx ˚C = zz.z. ˚C
yy ˚C = vv.v ˚C
Unit
Date, time
Syst: Running mode (Auto, Ma-
nual reduced, Man. norm., O)
 

To return to the start menu at once
– press and several times.
Modication of outdoor compensated supply temperature



Follow the steps
below

SystemAir E 28 Specifications

General

Brand	SystemAir
Model	E 28
Category	Controller
Language	English