Need help?Do you have a question about the SystemAir Geniox 12 and is the answer not in the manual?
General| Brand | SystemAir |
|---|---|
| Model | Geniox 12 |
| Category | Air Handlers |
| Language | English |
Lists all unit types for which the manufacturer declares conformity.
Details pictograms and warnings related to electrical, heat, and rotating parts dangers.
Outlines instructions for unit use, maintenance, and repair.
Details methods for unloading the air handling unit on site using forklifts or cranes.
Explains safe lifting techniques for units with and without base frames.
Provides details on lifting brackets and a critical safety caution for lifting.
Specifies required free space for unit servicing and component access.
Details requirements for supporting surfaces and base frame assembly.
Covers base frame types for outdoor units and their support requirements.
Explains how to position and assemble unit sections onto the base frame.
Details fastening the base frame and positioning unit sections.
Guides on using straps to pull and secure unit sections together.
Describes how to press and lock unit sections together for a tight seal.
Explains flexible duct connection installation and duct sizing.
Covers installation requirements for mains power supply, including residual current devices.
Highlights the need for overvoltage protection against lightning strikes.
Details the connection of the Systemair Control Panel to the controller.
Outlines procedures for unit start-up, adjustments, and commissioning.
Lists essential checks for installers before unit start-up.
Details crucial checks before powering on the unit and performing start-up.
Covers parameter adjustments, unit use, and descriptions of various functions.
Outlines procedures for unit commissioning and operation during hipernation.
Details hazards related to unit casing during transport and handling.
Covers risks associated with plug fans, lightning strikes, and permanent magnet motors.
Lists personal protective equipment and safety measures for maintenance.
Covers conditions for stability during use, transport, assembly, and dismantling.
Details the procedure to follow in case of breakdown or blockage for safe restart.
Explains how to safely shut down the unit before performing maintenance.
Covers locking unit doors and recommended maintenance intervals for various components.
Emphasizes filter replacement with identical characteristics to maintain SFP values.
Outlines protective measures and hazards related to rotating parts during maintenance.
Covers safety for frequency converters and safe practices for unit maintenance.
Lists essential personal protective equipment for maintenance personnel.
States that the declaration of conformity is printed separately and delivered with the unit.
Indicates that unique technical data is provided on separate pages with each unit.
Details how to select rotor speed signals using DIP switch levers.
Explains LED indications for rotor operation modes and motor resistance testing.
Provides detailed setup parameters for Danfoss FC101 with AC motors.
Provides detailed setup parameters for Danfoss FC101 with PM motors.
Lists LED codes, relay outputs, and their corresponding causes for ECblue diagnostics.
States that a commissioning protocol proposal is provided separately.
Indicates that a report with final functional test data is provided separately.
States that the wiring diagram is provided in a separate cover.
Explains that a separate manual assists users in operating the control panel.
To Next Page