Need help?Do you have a question about the SystemAir Geniox 20 and is the answer not in the manual?
General| Thermal Bridging Factor | TB2 |
|---|---|
| Filter Bypass Leakage | F9 |
| Heat recovery efficiency | up to 85% |
| Power supply | 50Hz |
| Weight | Varies by configuration |
| Dimensions (HxWxD) | Varies by configuration |
Information about Systemair A/S, the manufacturer and supplier.
Lists the specific Geniox unit models covered by this manual.
Manufacturer's declaration stating compliance with EU directives.
Overview of Geniox units, configurations, and basic information.
Explanation of pictograms for functions, warnings, and data labels.
Details on the hand terminal, automatic, and manual operation modes.
Instructions for unloading, lifting, and transporting unit sections.
Procedures for mechanical installation, including base frames.
Steps for electrical connections, power supply, and wiring diagrams.
Guidance for installing water pipes, valves, and drains.
Pre-start-up checklist and procedures for installers.
Description of unit functions, adjustments, and control system features.
Steps for commissioning the unit and final handover.
Information on residual risks and protective measures during operation.
Protective equipment and procedures for safe repair and maintenance.
Schedule of recommended maintenance tasks for unit components.
Guidance on replacing filters to maintain performance and safety.
Step-by-step instructions for replacing the controller's internal battery.
Conformity declarations, technical data, and spare part lists.
Instructions for assembling base frames of various heights and sizes.
Guidance on installing steel roofs for specific unit sizes.
Instructions for speed control and rotor assembly.
Details on reversible heat pump units and their controllers.
Instructions for fan motor connection and frequency converter setup.
Commissioning protocols, test reports, wiring diagrams, and operator's guides.
To Next Page