t.a.c. TAC Xenta 511 User Manual

TAC Xenta 511 and 911 Handbook 2 TAC Xenta 511
16 (32), 0-004-7870-0 (EN) TAC AB, 16 May 2003
• sysinfo: General system information. (This will be needed if
consulting the TAC Solution Team.)
System error log
• err: Error log with the 10 most recent errors.
• err select: Filtering and error log search.
• err file: Error log listing an extended period.
Diagnostics
• ps: Process profile displaying processes currently running.
2.5 System Program Update
The TAC Xenta 511 system program can be updated via the IP network
if you run an installation program on the PC (see figure below). The in-
stallation program is distributed by TAC.
1 Connect the TAC Xenta 511 to a LAN according to the figure.
2 Connect the PC to the same network and start the installation pro-
gram TAC Xenta511_nnnn.exe. (Obtained via TARAI or on a
TAC Vista IV CD.)
Type root, password, the 511 IP address and follow the instructions on
the screen.
10 Mbps patch
UTP or STP cable
MMC
A RS232 B
10Base-T
LAN
Connecting the TAC Xenta 511 to a Local Area Network

t.a.c. TAC Xenta 511 Specifications

General

Brand	t.a.c.
Model	TAC Xenta 511
Category	Server
Language	English