T-Fal BeerTender User Manual (English)

Questions and Answers:

B
brian15Aug 12, 2025
What to do if no beer is being dispensed from my T-Fal Kitchen Appliances?
- D
  David GuerraAug 12, 2025
  If no beer is dispensing from your T-Fal Kitchen Appliances BeerTender, several factors could be at play. First, ensure the appliance is switched on. If it is, the DraughtKeg might be empty, requiring replacement. Also, confirm there's a DraughtKeg installed inside the BeerTender. Finally, check that the tap handle is correctly installed and positioned; adjust it if necessary.
B
Brian MyersAug 16, 2025
Why is my T-Fal Kitchen Appliances BeerTender producing too much foam?
- J
  Justin BartonAug 16, 2025
  If your T-Fal Kitchen Appliances BeerTender is producing too much foam, it could be due to several reasons. The DraughtKeg may not have reached the correct dispensing temperature; allow it to cool adequately, using the temperature indicator as a guide. Another cause might be that the DraughtKeg was shaken; if so, wait 4 hours before dispensing. Lastly, ensure you are pulling the tap handle firmly and quickly all the way down and forward.
C
Curtis Mcbride Jr.Aug 19, 2025
How to close the lid of my T-Fal Kitchen Appliances BeerTender?
- S
  Shirley RomeroAug 19, 2025
  If you're having trouble closing the lid of your T-Fal Kitchen Appliances BeerTender, it might be due to the tap cover not being correctly positioned; ensure it is properly aligned. Another possibility is that the DraughtKeg hasn't been correctly installed. Make sure the tap is correctly installed and that the draught tube is fully inserted and not obstructing the lid.
H
Haley MortonAug 25, 2025
What to do if my T-Fal BeerTender Kitchen Appliances does not come on?
- S
  scott50Aug 25, 2025
  If your T-Fal Kitchen Appliances appliance isn't turning on, the first thing you should check is whether it's properly connected to the outlet. If not, connect the appliance to the outlet.
J
Jose MoralesAug 27, 2025
Why is my T-Fal Kitchen Appliances dispensing warm beer?
- M
  Matthew RosalesAug 27, 2025
  If your T-Fal Kitchen Appliances BeerTender is dispensing warm beer, the DraughtKeg hasn't been chilled long enough to reach the correct serving temperature. Allow the DraughtKeg to cool sufficiently in the appliance.
B
benjamin91Aug 31, 2025
What to do if beer flows out too slowly from my T-Fal Kitchen Appliances?
- R
  Robert GravesAug 31, 2025
  If beer is flowing too slowly from your T-Fal Kitchen Appliances BeerTender, the tap handle may not be fully open. Ensure you open the tap completely to allow proper flow.
A
anthonyrobinsonSep 4, 2025
Why isn't the temperature indicator lighting up on my T-Fal BeerTender Kitchen Appliances?
- G
  Gregory GainesSep 4, 2025
  If the temperature indicator on your T-Fal Kitchen Appliances BeerTender's control panel isn't lighting up, the appliance might be exposed to excessive heat or direct sunlight. Move it indoors to a room where the temperature doesn't exceed 86°F.
W
William MccormickSep 7, 2025
Why is ice forming in the cooling chamber of my T-Fal Kitchen Appliances?
- S
  Sandra ShafferSep 8, 2025
  If ice is forming in the cooling chamber of your T-Fal Kitchen Appliances BeerTender, it could be due to the appliance being installed in a humid environment; move it to a dry place. Alternatively, a fault may have occurred in the cooling system, in which case you should have the BeerTender repaired by an authorized service center.

T-Fal BeerTender Specifications

General

Brand	T-Fal
Product Name	BeerTender
Category	Kitchen Appliances
Type	Beer Dispenser
Capacity	5 liters
Power Source	Electric
Material	Plastic
Cooling System	Thermoelectric
Color	Black
Power	70 watts
Compatible Keg	Heineken