8
Auto Shut-Off
As a convenience, your coffee maker has been
designed with an Auto Shut-Off feature. When
the brewing cycle is completed, the coffee
maker will shut off automatically after 2 hours.
6. Programming your coffee maker
Auto on setting
1- Check to ensure that the clock is set to the
correct time. If the time is incorrect, follow the
instructions in the “Setting the Clock” section.
2- Follow steps 1 through 6 in the “Making
Coffee” section.
3- Press the PROG button (n).
4- Use the H (o) and MIN (p) button to set the
desired start brewing hour. Refer to the AM
and PM indicators on the bottom left and
right side.
5- Press the button (m). The LED light will
illuminate to indicate that the coffee maker is
programmed. The digital clock will continue
to show the current time.
6- Once the preset brew time is reached, the
coffee maker will automatically initiate the
brew cycle. The On/Off button (k) will
illuminate, indicating that your coffee maker
has begun the brewing cycle. The button
(m) will switch off.
To cancel a preset brewing cycle, press the
button (m) - the preset brew cycle is cancelled
when the button (m) is no longer illuminated.
For your convenience, your coffee maker will
remember your preset brewing time. Simply
press the button (m) to activate the preset
brewing cycle. To change the preset brewing
time, follow steps 3 through 7 above.
Note: At any time
during the brewing
cycle, you can turn
the coffee maker
off or cancel the
brewing cycle, by
simply pressing the
On/Off button (k).
No buttons will be
illuminated,
indicating that the
coffee maker is off.
To Next Page
Loading...
Need help?
General
