EN
9
Pause & serve
• This feature allows you to interrupt the
brewing cycle and pour a cup of coffee before
the entire carafe is finished brewing.
While this will temporarily stop the coffee from dripping into
the carafe, it does not stop the brewing cycle. After serving, the carafe
should be immediately returned to the heating plate to prevent the filter
holder from overflowing.
Make sure the carafe is positioned firmly against the back of the coffee
maker. Dot not remove the carafe for longer than 30 seconds.
• This coffee maker allows you to adjust the
Stay Warm Setting to slightly reduce the
temperature of the coffee after it has brewed.
• When brewing the coffee, a steady orange
light will appear on the keep warm button
(l). To reduce the Keep Warm setting, press the
keep warm button (l) once, and the steady
orange light will then blink.
• This setting should be used when the carafe is
half full or less, to ensure the coffee quality is
maintained.
• The Stay Warm setting will continue to
operate as long as the unit is on and will shut
off automatically after two hours.
• When you begin to brew a new pot of coffee,
the steady orange light will reappear,
indicating the coffee maker will maintain the
temperature of the higher Stay Warm Setting.
7. Cleaning
• To remove the used coffee grounds, remove the
filter holder from the coffeemaker.
(Fig 10).
• Unplug the appliance.
• Do not clean the appliance when it is still hot.
• Wash carafe, carafe lid and removable filter
NOTE: While the
pause and serve
feature is a
convenient way to
pour a cup of coffee
mid-cycle, we
recommend you
wait until the
brewing cycle is
complete as the
strength and flavor
of coffee poured
mid-cycle will vary
from the finished
brew.
To Next Page
Loading...
Need help?
General
