10
19 -20 When the color corresponding
to your choice of cooking level
appears, open the appliance and
remove your food.
21
Close the appliance.
The control panel will light up and
set itself to ‘choice of program’
mode..
Comment: the security system
will turn off automatically if no
program selection is made.
Cooking more food
If you want to cook a second
batch of food, please pre-heat
the appliance again (see section
2. Pre-heating, starting from point
9) even if you want to cook the
same type of food.
How to cook another batch of
food:
After finishing your first batch of
food:
1.Make sure the appliance is
closed with no food inside.
2. Select the appropriate cooking
mode/program (this step is
necessary even if you decide to
pick the same cooking mode than
for the previous batch of food).
3. Press the “OK” button: the
appliance starts pre-heating. The pre-
heating is symbolized by the cooking
level indicator that flashes purple.
4. The pre-heating is complete
when an audible beep is heard
and the cooking level indicator
stops flashing purple.
5. After the pre-heating, the
appliance is ready for use. Open
the grill and place the food inside
the appliance.
Important:
- Please note that for any new
batch of food, the pre-heating
phase is mandatory. Remember
to always have the grill closed and
no food inside in order for the pre-
heating to effectively function.
21
19
20
To Next Page
Loading...
Need help?
General
