11
2. In case you have to take or send in your defective device for repair, please be sure to enclose the following documents:
- Sales receipt (sales slip).
- A description of the occurring defect (a description as accurate as possible will expedite the repair work).
3. In case you have to take or send in your defective device for repair, please remove any attached parts which do not
belong to the original condition of the device. If any attached parts of this kind should be missing upon the return of the
device, we shall not be liable for them.
11. How to order spareparts
The fastest, most simple and cheapest way of ordering spare parts is through the internet. On our www.tip-pumpen.de
website you will find a convenient spare part shop where you can order spare parts with just a couple of clicks. In addition,
this is also the place where we publish comprehensive information and valuable tips on our products and accessories,
introduce new devices and present current trends and innovations in the range of pump technology. Original spare parts
and accessory, which are authorized by the manufacturer, ensure a high degree of safety. The manufacturer of the pump
is not liable for any damage or injuries which is caused by the usage of non authorized spare parts and accessory.
Fig. 8
Position Part No. Description Quantity
1 72140 Lid with 4 position valve 1
2 72141 Flange clamp set 1
3 72142 o-ring 1
4 72143 Sand filter tank 1
5 72144 Tube with filter basket 1
6 72145 Drain plug 1
7 72146 Sand filter support 1
8 72147 Screws M6*25 and nut M6 4
9 72148 O-ring 5
10 72149 Hose connector 5
11 72150 Hose clamp 2
12 72151 32 mm (1 1/4″)*45 cm hose 1
13 72152 250 Watt pump (220~240V-50HZ) 1
14 72153 Funnel (neck fitting) 1
15 72154 Pressure gauge 1
16 72155 Plug with o-ring 47.8 mm (1 1/2″) male 1
To Next Page
Loading...
