Welcome
Start Guide
Grant R. Brimhall Library - 1401 E. Janss Road, Thousand Oaks, CA 91362
• 805-449-2660
Newbury Park Library - 2331 Borchard Road, Newbury Park, CA 91320 • 805-498-2139
www.tolibrary.org
9 10
Advanced to choose SSID from the list of
available networks.
• From an iOS device: Settings -> Wi-Fi. Choose
SSID from the list of available networks.
• From an Android device: Settings -> Wi-Fi
settings. Choose the SSID from the list of
available networks.
3. Enter password located on the label on the back
panel and click OK.
USE THE WPS
If your Wi-Fi device supports WPS, you do not have to
input the password manually after WPS connection has
been established. Please follow the following steps:
1. Power on your Mobile Hotspot and enable the Wi-Fi
function.
2. Press and hold the WPS key on your device for
3 seconds to start the Wi-Fi Protected Setup
authentication process.
3. Enable the WPS function on your Wi-Fi device in
order to respond to this authentication process.
4. Follow the system prompts on your Wi-Fi device to
finish the connection.
5. If no Wi-Fi device is connected within 2 minutes,
WPS
function will automatically close.
MANAGING YOUR MOBILE HOTSPOT
ACCESSING YOUR MOBILE HOTSPOT
You can access your Mobile Hotspot device information
using an Internet browser.
To access using a browser:
1. Connect to your hotspot device through Wi-Fi using
the network connection software on your computer.
Provide the Wi-Fi network password, if requested.
2. Open a browser and enter http://mobile.hotspot or
http://192.168.0.1 in the address bar. The Mobile
Hotspot login screen will appear.
3. Enter your Password in the field provided.
You can find your default admin password and Wi-Fi
password on the label located on the underside of
the battery cover.
To Next Page
Need help?
General
