ATW weighting scales operation manual REV: C1, June 2012 ATW weighting scales operation manual
CONTENT
1. INTRODUCTION…………………………………………………………1
2. KEY DESCRIPTIONS…………………………………………………1
3. OPERATION ……………………………………………………………….2
3.1 ZEROING THE DISPLAY………………………………………………2
3.2 TARING…………………………………………………………………….2
3.3 CHECK-WEIGHING………………………………………………….3
3.4 CHANGE WEIGHING UNIT……………………………………………4
4. BATTERY OPERATION …………………………………………………4
5. PARAMETERS …………………………………………………………4
5.1 BACKLIGHT SETTING…………………………………………………5
5.1 BACKLIGHT SETTING
The display will show "d xx" To select a different increment value
press the TARE key to change the value then press the ZERO key to
sure.
The standard is to have the backlight operate automatically, turning
off when the scale is not used. The backlight can be set to be "EL
On" , "EL Au" (Automatic) or "EL Off". The maximum battery life
is achieved with the backlight turned off.
Press the TARE key to change the value then press the ZERO key
to sure.
-5-
To Next Page
Loading...
Need help?
General
