Need help?Do you have a question about the T Scale ATW Series and is the answer not in the manual?
Recommendations for placing scales to ensure accuracy and avoid damage from environmental factors.
Instructions for physically setting up the ATW series scale, including platform placement and leveling.
Sets the zero point and has a secondary function for parameter setting.
Tares the scale and has a secondary function for incrementing digits.
Sets limits for check-weighing and has a secondary function for moving digits.
Selects the weighing unit (kg, lb, oz, etc.).
Procedure for setting the zero point, including automatic rezeroing.
How to tare the scale to measure net weight, including handling removed containers.
Guide to setting high and low limits for audible alarms during weighing.
Steps for performing linear calibration, including loading weights and stability checks.
Steps for performing normal calibration, including loading weights and stability checks.
To Next Page
General
